Contrôleurs et électroniques pour moteurs linéaires, couples, pas à pas et servomoteurs DC

Motion Controllers & Drivers for Linear, Torque, Stepper & DC Servo Motors

PI develops motion control solutions in-house to best adjust the features to the requirements of both drive and application. PI’s motion controllers are available as single-channel or multi-channel devices in benchtop, rackmount or OEM versions. 
Standard hexapod controllers offer the additional motion control of two DC motor axes. For any other configuration, please contact us.

For PIMag® Magnetic Linear & Torque Motors

NOUVEAU

A-811.CE PIglide Motion Controller for One Axis

For Stages with Direct Drive, TCP/IP Interface
  • Motion controller for motor stages with air bearings. High end for industrial precision automation - linear and rotary motion.

G-910.RC01 • RC03 ACS Driver Module for Low Power Requirement

For 2 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor

G-910.RC02 Motion Controller for Low Power Requirement

Integrated Driver for up to 2 Axes, EtherCAT Master for Synchronizing up to 4 Axes
  • Fully integrated solution with ACS motion controller and ACS driver module for 2 axes in a compact housing, directly compatible with positioners from PI.

G-901 Motion Controller for High Power Requirement

Integrated Driver for up to 4 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor

C-891.130300 PIMag® Motion Controller for Magnetic Direct Drives

1 Axis, for 3-Phase Linear Motors
  • Magnetic direct drive
  • For 3-phase linear motors
  • PID controller
  • Point to point movement

A-82x PIglide Motion Controller for 4, 6 or 8 Axes

For Stages with Direct Drive and High Power Requirements, TCP/IP Interface
  • High power motion controller for linear motor stages with air bearings. High end for industrial precision automation - linear and rotary motion.

A-81x PIglide Motion Controller for 1, 2 or 4 Axes

For Stages with Direct Drive, TCP/IP Interface
  • Direct Drive, TCP/IP Interface
  • 1, 2, & 4 motion axes
  • Quiet PWM drives
  • Output 10A continuous/20A peak/axis

C-413 PIMag® Motion Controller

Control of Force, Position, and Velocity
  • Control: Force, Position, Velocity
  • 1 or 2 Motor Channels
  • Real-time SPI interface
  • Servo update rate to 10kHz

For DC & Brushless DC (BLDC) Servo Motors

NOUVEAU

A-811.CE PIglide Motion Controller for One Axis

For Stages with Direct Drive, TCP/IP Interface
  • Motion controller for motor stages with air bearings. High end for industrial precision automation - linear and rotary motion.

G-910.RC01 • RC03 ACS Driver Module for Low Power Requirement

For 2 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor

G-910.RC02 Motion Controller for Low Power Requirement

Integrated Driver for up to 2 Axes, EtherCAT Master for Synchronizing up to 4 Axes
  • Fully integrated solution with ACS motion controller and ACS driver module for 2 axes in a compact housing, directly compatible with positioners from PI.

G-901 Motion Controller for High Power Requirement

Integrated Driver for up to 4 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor

A-82x PIglide Motion Controller for 4, 6 or 8 Axes

For Stages with Direct Drive and High Power Requirements, TCP/IP Interface
  • High power motion controller for linear motor stages with air bearings. High end for industrial precision automation - linear and rotary motion.

A-81x PIglide Motion Controller for 1, 2 or 4 Axes

For Stages with Direct Drive, TCP/IP Interface
  • Direct Drive, TCP/IP Interface
  • 1, 2, & 4 motion axes
  • Quiet PWM drives
  • Output 10A continuous/20A peak/axis

C-884.4DC • C-884.6DC Motion Controller for DC Motors, 4 or 6 Axes

For Positioners with Closed-Loop DC Motor, USB, RS-232, TCP/IP, SPI, I/O, Joystick
  • 6-Axis or 4-Axis
  • Trapezoidal velocity profil
  • detailed motion system analysis
  • Cost Efficient

C-887.52x Hexapod Motion Controller

Compact benchtop device for controlling 6-axis parallel kinematics
  • High performance with DC motors
  • Remote control &amp
  • maintenance
  • Easy Integration

C-887.53x Hexapod Motion Controller with EtherCAT®

Control a 6-Axis Positioning System via Fieldbus Interface
  • DC motors
  • Seamless &amp
  • easy integration
  • Guarantees low reaction times

C-863 Mercury Servo Controller

1 Axis, for DC Motors and PWM Motor Drivers
  • High performance
  • Precision motion control
  • High-speed encoder input
  • Powerful programming language
  • Low cost

C-863.20C885 DC Motor Controller Module for C-885 PIMotionMaster

For DC Motors and Brushless DC Motors, 2 Axes
  • High-speed encoder input
  • PID controller
  • Powerful programming language
  • Extensive software support

For Stepper Motors

G-910.RC01 • RC03 ACS Driver Module for Low Power Requirement

For 2 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor

G-910.RC02 Motion Controller for Low Power Requirement

Integrated Driver for up to 2 Axes, EtherCAT Master for Synchronizing up to 4 Axes
  • Fully integrated solution with ACS motion controller and ACS driver module for 2 axes in a compact housing, directly compatible with positioners from PI.

G-901 Motion Controller for High Power Requirement

Integrated Driver for up to 4 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor

C-663.12C885 Mercury Step Stepper Motor Controller Module

For the C-885 PIMotionMaster Modular Controller System
  • High microstep resolution
  • Fast-running motor
  • Closed-loop operation
  • Fast startup

C-663.12 Mercury Step Stepper Motor Controller, 1 Axis

For Closed-Loop and Open-Loop Operation, HD Sub-D 26, 48 V
  • High microstep resolution
  • Closed- & Open-Loop Operation
  • Operating voltage up to 48 V
  • Support for external sensors